Baumit Plasters and Renders: modern lime, lime-cement and silicon plasters and renders from the foremost mainstream producer in Germany.
Baumit have expert knowledge in high performance external render systems, thermal insulation systems and renovation and salt protection systems. All the systems (including Silicon renders) are highly breathable and fully approved. Baumit are ISO 9001 and 14001 certified.
Ready to use, acrylic based liquid primer for gypsum surfaces. Internal and external use. Essential when using lime plasters on gypsum plaster board.
HM 50 is a bonding coat for use in all external and internal areas including the plinth area with the provision of a gravel drainage. Ideal background for mineral and resin decor render finishes.
MC55W is a multi purpose bonding mortar and white base coat render. For use in all external and internal areas. Ideal background for mineral and resin decor render finishes. Mineral MC 55 W can also be used as a reinforcing mesh coating onto basecoats and insulation boards.
Mineral scratch render, thick coat decor render finish directly onto all standard mineral base coats, insulation renders, salt retention renders, fillers and the reinforced meshing coats of ETICS. For producing a scratched, pitted texture in external and internal areas and areas subject to high humidity. Component of the BaumitBayosan External Thermal Insulation Composite System (ETICS).
SEP 01/02/03/04 is a mineral finish coat render onto all standard mineral base coats, onto the reinforced meshing coats of insulation renders and fillers. Different grain sizes, 1mm, 2mm, 3mm & 4mm produces a choice of textured finishes. Once hardened, they are water-vapour and CO2 permeable, frost resistant with low staining tendencies, non-combustible and weather resistant. DO NOT APPLY SEP IN THE PLINTH AREA
KWP 05 is a rough cast coating which can be applied on to all mineral base coats with a grain size up to 5mm
Suitable as an undercoat render for plastering high-performance thermal masonry walls such as Thermoplan
Mineral lightweight insulating mortar used for filling joints and holes in the Thermoplan Masonry System blocks to maintain the system U-value.
Hydraulic lime plaster for use as basecoat and finishing coat, for all internal areas, onto most types of masonry. Use as a dubbing out coat prior to applying Pavadentro
Hydraulic lime plaster for use as bonding coat and finishing coat, for all internal areas, onto most types of masonry. As an adhesive for applying Pavadentro and finishing plaster onto Pavadentro.
Ready to use, silica resin based decorative thin coat render, for manual and machine application.
Lightweight lime/cement render for use as basecoat and finishing coat for external and internal areas including those subject to high humidity.
Supplied with blocks when ordered (meshed or un-meshed) but can be purchased separately.
